1. Home
  2. Pages

Power Transformer

What is a power transformer?

power transformer is a type of electrical transformer used to transfer electrical energy between two or more circuits, typically at high voltages. Its primary function is to step up or step down the voltage levels in an electric power transmission and distribution system, ensuring that electrical power is efficiently transmitted over long distances from power plants to consumers.

Power transformers are designed for high-voltage applications and can handle very large amounts of electrical power. They are crucial components in the electrical grid and are typically used in substations, power stations, and for industrial applications.

Power Transformer Voltage range from:

Primary Voltage Range: Generally between 69 kV and 765 kV.

Secondary Voltage Range: Typically between 33 kV and 400 kV, depending on the specific application and location of the transformer.

Application of Power Transformer

Power Generation Plants (Power Stations)

Power plants generate electricity at relatively low voltages (usually between 11 kV to 25 kV), which is not suitable for long-distance transmission due to high losses. Step-up transformers are used to increase the voltage to much higher levels (e.g., 110 kV, 220 kV, or 400 kV), which reduces power losses and makes long-distance transmission more efficient.

Electricity Transmission Networks

In transmission networks, high-voltage power transformers are used to step up the voltage for efficient transmission over long distances. High-voltage transmission reduces current, which in turn reduces losses caused by the resistance of transmission lines.

These transformers can step up the voltage to levels as high as 765 kV, depending on the transmission line’s distance and requirements.

Substations

Substations use power transformers to step down the high transmission voltage to lower distribution voltages (typically from 33 kV, 132 kV, 220 kV to 11 kV, 6.6 kV, 400 V for industrial or residential use). This step-down process ensures that the voltage is safe and usable for consumers and industries.

Electricity Distribution Networks

Power transformers in distribution networks step down the voltage even further to levels suitable for residential, commercial, and industrial usage, typically 400 V, 230 V, or 690 V. These transformers ensure that the electrical supply is delivered at safe voltage levels to end-users.

Industrial Applications

Large industrial facilities, such as factories, mining operations, and chemical plants, often require custom transformer solutions. These transformers supply the specific voltages required for heavy machinery, such as motors, presses, furnaces, and other industrial equipment.

The voltage can range from 3 kV to 35 kV or even higher, depending on the machinery’s needs.

Renewable Energy Systems

Power transformers are also used in renewable energy systems (such as wind farms, solar power plants, and hydroelectric facilities) to adjust the voltage of the generated electricity before it is sent to the grid. These transformers are essential for connecting renewable energy sources to the national grid or local distribution systems.

Data Centers and Telecom Infrastructure

Power transformers are used in data centers, telecommunications hubs, and server farms to supply reliable power. These transformers help maintain a stable and uninterrupted power supply, ensuring that the data center operates efficiently and without failure.

Transportation (Railways and Electric Trains)

Power transformers are used in railway systems, especially in electric trains, to step down the high-voltage electricity supplied by overhead lines or the railway grid to a lower, usable voltage for the train’s motors.

Oil and Gas Industry

Power transformers are used in the oil and gas industry to supply power to refineries, offshore platforms, and processing plants. These industries require transformers to step up or step down voltage for equipment such as pumps, compressors, and electrical motors.

Military Applications

Power transformers are also used in military operations to supply electrical power to field equipment, temporary bases, and operations in remote areas.

Mining Operations

Power transformers supply electricity to mining operations, where heavy equipment like crushers, drills, and conveyors require significant amounts of power.

Parts of Power Transformer

Core

The core is typically made from laminated silicon steel sheets, which are insulated from each other to reduce eddy currents and improve efficiency.

The core provides the magnetic path for the transformer’s electromagnetic field. It helps to transfer energy between the primary and secondary windings via the magnetic flux.

The core is generally rectangular or cylindrical and consists of thin laminations to minimize energy losses. It is designed to handle the high magnetic flux generated during operation.

Windings

Primary Winding: The winding that receives power from the source (high voltage side).

Copper or aluminum wire is commonly used for the windings due to their good conductivity.

Secondary Winding: The winding that supplies power to the load (low voltage side).

The windings are responsible for transferring energy from the primary to the secondary circuit through electromagnetic induction. The number of turns in each winding determines the voltage ratio (step-up or step-down) of the transformer.

Windings are insulated to prevent electrical short circuits and to ensure the safe operation of the transformer.

Tank

Usually made of steel, the tank is a large, durable container that houses the core, windings, and insulating oil.

The tank provides mechanical protection to the internal components and also serves as a container for the cooling medium (usually oil).

Tanks are typically filled with insulating oil (in oil-filled transformers) to help dissipate heat and prevent arcing.

Insulating Oil

Type: Common insulating oils include mineral oil, silicon oil, or vegetable oils (biodegradable).

Insulating oil serves two purposes:

Insulation: It prevents electrical shorts and arcing between the transformer’s internal components.

Cooling: The oil dissipates heat generated by the transformer during operation.

Additional Components:

  • Conservator: A separate small oil tank that compensates for the expansion and contraction of the oil due to temperature changes.
  • Breather: A device attached to the conservator, which prevents moisture from entering the oil tank by absorbing atmospheric moisture.

Bushings

Bushings are insulating devices that allow electrical connections to pass through the transformer’s tank, connecting the transformer to external circuits.

They are typically made from porcelain or composite materials and feature internal insulation to ensure that no electrical leakage occurs between the transformer and the external conductors.

Tap Changer (On-Load or Off-Load)

Tap changer allows the voltage to be adjusted by selecting different “taps” on the windings. This helps in regulating the output voltage to compensate for fluctuations in the load or input voltage.

Types:

  • On-load Tap Changer (OLTC): It enables the adjustment of voltage without disconnecting the transformer from the load.
  • Off-load Tap Changer: Voltage adjustment can only be done when the transformer is not in operation.

Cooling System

To dissipate the heat generated during the transformer’s operation, ensuring that the transformer operates efficiently and does not overheat.

Components:

  • Radiators: Finned surfaces or tubes attached to the transformer tank to increase the surface area for heat dissipation.
  • Fans: In large transformers, fans may be used in conjunction with radiators to enhance cooling.
  • Oil Pumps: Used to circulate the insulating oil in some larger transformers to improve cooling efficiency.

Pressure Relief Valve

A safety device that releases excess pressure inside the transformer tank if it builds up due to faults (e.g., an internal short circuit or overheating). This prevents damage to the transformer and ensures safe operation.

It typically opens when the internal pressure exceeds a preset level, venting gases or oil to avoid rupture.

Core and Coil Assembly

Core: Provides the magnetic path.

Coils: The primary and secondary windings, which generate the magnetic fields and transfer energy.

Tap Changer Mechanism

Tap changers are used to select different voltage levels (taps) on the transformer’s windings.

  • On-Load Tap Changer (OLTC): It can adjust the voltage under load conditions.
  • Off-Load Tap Changer: It is used when the transformer is de-energized.

Grounding System

The grounding system ensures the safe operation of the transformer by providing a safe path for fault currents to flow to the ground. It helps prevent electrical shocks and fires in case of faults.

Oil Level Indicator

This device shows the level of oil in the transformer tank. It ensures that the oil level is maintained at an optimal level for insulation and cooling. If the oil level is low, it may indicate a leak or other issues.

Silica Gel Breather

The breather removes moisture from the air entering the transformer. It typically contains silica gel that absorbs moisture to prevent water from contaminating the insulating oil, which could degrade its performance.

In summary, the voltage range of a power transformer can vary significantly, depending on whether it is being used for transmission, distribution, or industrial purposes. Power transformers can handle voltages ranging from a few kV (in low-voltage distribution applications) to several hundred kV (in high-voltage transmission applications).

Testing for Power Transformers

Testing requirements for power transformers are essential for verifying their performance, safety, and reliability under different operating conditions. These tests ensure that transformers meet the technical specifications and can function effectively throughout their operational life. Testing is carried out according to international standards such as IEC 60076, IEEE C57.12, and ANSI standards. These tests can be categorized into type tests, routine tests, and special tests.

Type Tests

Type tests are performed to verify that the transformer design meets the relevant standards and performance criteria. These tests are usually conducted on prototype transformers or representative units of a particular design. The results confirm that the transformer will meet the required specifications under normal and fault conditions.

Key Type Tests for Power Transformers:

Temperature Rise Test

Standards: IEC 60076-2, IEEE C57.12.00

Method: The transformer is subjected to full-load current, and the temperature of the windings, oil, and the core is measured.

Dielectric Tests (Insulation Tests)

Standards: IEC 60076-3, IEEE C57.12.00

Tests:

  • Induced Overvoltage Test: The transformer is subjected to a voltage higher than the rated voltage to check for breakdowns.
  • Lightning Impulse Test: A high-voltage impulse is applied to simulate lightning strikes or switching surges.
  • Power Frequency Test: The transformer is exposed to a higher frequency voltage to simulate steady-state voltage conditions.

Short-Circuit Test

Standards: IEC 60076-5, IEEE C57.12.00

Method: A short circuit is applied to the secondary winding of the transformer while the primary winding is supplied with voltage. The transformer must be able to withstand the forces generated by the short circuit.

Impedance and Load Loss Tests

Standards: IEC 60076-8, IEEE C57.12.00

Method: The voltage and current are measured at the primary side under rated load conditions, and the losses (copper losses, core losses) are calculated.

Noise Level Test

Standards: IEC 60076-10, IEEE C57.12.90

Method: The transformer is operated under full-load conditions, and noise levels are measured at various distances from the transformer.

No-Load Loss and No-Load Current Test

Standards: IEC 60076-8, IEEE C57.12.00

Method: The transformer is energized at rated voltage, and the no-load losses (core losses) and no-load current are measured.

Power Frequency Voltage Withstand Test

Standards: IEC 60076-3, IEEE C57.12.00

Method: A high-voltage AC is applied between windings and between windings and ground to ensure insulation integrity.

Routine Tests

Routine tests are conducted on every transformer during the manufacturing process to ensure that the individual transformer meets its design specifications and operates correctly before shipment.

Key Routine Tests for Power Transformers:

Induced Voltage Test

Purpose: To verify that the transformer’s insulation is able to withstand the induced voltage.

Method: A test voltage is applied between the windings and ground to ensure insulation integrity.

Measurement of Winding Resistance

Purpose: To verify the resistance of the transformer windings and check for any shorts or opens in the windings.

Method: A low DC voltage is applied to the windings, and the resistance is measured.

Insulation Resistance Test

Purpose: To assess the resistance of the transformer’s insulation system.

Method: A DC voltage is applied to the windings, and the insulation resistance is measured using a megger or insulation resistance tester.

No-Load Current and Losses

Purpose: To measure the current drawn by the transformer when it is energized without a load.

Method: The transformer is energized, and the no-load current and losses are measured.

Tap Changer Operation (If Applicable)

Purpose: To verify the proper functioning of the tap changer, especially in on-load tap-changers (OLTC).

Method: The tap changer is tested under both no-load and under-load conditions to ensure smooth operation.

Measurement of Turn Ratio

Purpose: To ensure that the turns ratio of the transformer matches the design specifications.

Method: The ratio is measured by applying a known voltage to one winding and measuring the output on the other winding.

Special Tests

Special tests are performed based on specific requirements or concerns for a transformer, often after installation or when transformers are used in specialized applications.

Key Special Tests for Power Transformers:

Partial Discharge Test

Purpose: To detect small electrical discharges within the transformer’s insulation system, which could indicate potential insulation failure.

Method: A high voltage is applied, and partial discharge is measured in the form of electrical pulses.

Seismic Test

Purpose: To assess the transformer’s ability to withstand seismic (earthquake) forces.

Method: The transformer is subjected to simulated seismic forces to verify its structural integrity.

Overload Test (Short-Circuit Testing)

Purpose: To verify the transformer’s ability to handle overload conditions or short-circuit situations.

Method: The transformer is subjected to fault conditions to simulate extreme loading.

Vibration Test

Purpose: To check the structural integrity and mechanical stability of the transformer, especially in high-vibration environments.

Method: The transformer is subjected to vibration levels similar to those it would experience in service.

Oil Quality Testing

Purpose: To ensure that the transformer’s insulating oil is free from contaminants and has the proper properties for insulation and cooling.

Tests:

  • Dielectric Strength Test: To check the oil’s ability to withstand electrical stress.
  • Moisture Content Test: To ensure there’s no moisture in the oil, which could degrade insulation.
  • Acidity and Impurity Tests: To check for degradation or contamination of the oil.

 

 

power-Transformer
38kV Class 20mVA Three Phase Power Transformer